New 2011 RT-EVP Now With EVP Data Logging Capability!

• Operates as a Standard EVP Voice Recorder  ( Real Time OFF )
• Operates as a Standard EVP Voice Recorder with Simultaneous Real Time Audio File Extraction  (Playback is 1sec to 60sec)
• Operates as an EVP Recorder with White Noise added.
• Enhanced Adjustable MIC Sensitivity
• Numerical 4-digit (0000) EVP Counter Interface Allows for more advanced question and response sessions. The Numerical Counter Interface with adjustable sensitivity, increments when a response is received, Tags, Dates Time Stamps the EVP Location on the recorded file, and can Separate a Class "A" EVP from other weaker responses.
• Auto ON / OFF Data Logging feature allows the RT-EVP's Counter Interface to be turned on/off to gather data automatically. This allows the user to place the RT-EVP anywhere and then retrieve it later. If any disturbances are detected during the recording time, they will logged and appear as tagged "counts" in the file. These Tags which identify the exact location of the disturbance, are provided to eliminate unnecessary file review time.
•  A remote MIC is provided with separate left / right channel separation for assistance in determining EVP origin in a room. It is important to note that this MIC only operates down to 20Hz. Also, the remote MIC quality is not as good as our internal 15Hz MIC. This is offered  at no additional cost increase to the RT-EVP.  It is to be used for test and research purposes only.
•  New Custom made 15Hz Sound Isolating ear buds from Koss provides a separate volume control on the real time Playback. This will allow the user to adjust the playback volume control to eliminate any feedback at high MIC sensitivities.
• Amplify Ambient Sounds up to 81.5dB with the Recorder ON or OFF to hear very low level voices and sounds.
  
• Operates in FM Frequency Sweep Mode with Multi Step Speed Adjustment from 50mS to 110mS
• Operates in FM Frequency Sweep & EVP Combination (Hybrid Mode) with Simultaneous Playback
• Frequency Sweep Forward or Reverse
• Intelli-Q, Real Time Data Analysis, permits Audio and Sweep Frequency sounds to be  Repeated without Interfering with your Recording Session.

  

   
   

Model: RT-EVP Q & A

 

Since the initial press release on the new RT-EVP, we have received many questions regarding the RT-EVP features and functions.  If you have a different question that does not appear in this list, feel free to email us at sales@Pro-measure.com.

 

 

Question: What types of functions are available in the RT-EVP?

Answer:    The RT-EVP can be configured to operate:

A)   Standard Digital Recorder (Auto Playback OFF)

B)    EVP Recorder with Simultaneous Playback ON

C)    EVP Recorder with White Noise Added

D)    FM (77.0MHz to 108.0MHz) Frequency Sweep (Spirit Box) with multi-step Speed control (Microphone OFF)

      Note: April 1st we added an additional 100 frequency steps (77.0MHz to 87.9Mhz) there are now a total of 300 frequency steps. The 77.0MHz to 87.9Mhz are typically used in Japan and are not part of the USA broadcast spectrum.

E)    Combination EVP and FM Frequency  (Hybrid, with Microphone ON)

 

Question: How much Memory do you have in the RT-EVP?

Answer:    The Standard is 4GB (Flash Memory) and it provides about 2-3 hours of recording time

 

Question:  Does RT-EVP have a Backlight for use in the Dark?

Answer:     Yes, The Backlight can be programmed to stay ON or OFF. You can also enter an OFF delay time that suits your convenience.  A Power OFF� feature can be enabled. This will turn the RT-EVP Power OFF if the unit is not used for a period of time. The backlight  is bright enough to use as an emergency  navigation  light source.

 

Question:   Can I use a remote speaker with the RT-EVP?

Answer:       Yes, this can be done as long as the speaker is at least 15 feet away, and pointing away from the RT-EVP.  Otherwise the unit will easily detect the sound from the speaker and there will be a continuous feedback. The best way to use the RT-EVP is with a headset or earphone. We have experimented using  remote amplified speakers over 100' away.

 

Question: Can the RT-EVP be upgraded?

Answer:    Yes, to a degree. Lets say that we decide to change the FM Frequency Sweep Rate speed adjustment from 12-19 seconds to 12 to 30 seconds. This software change can be emailed to you and easily loaded into the RT-EVP. There may be times when we create a new application or feature within the RT-EVP. Any "Basic" software upgrade changes that we make can be made available to our customers at no charge.

 

Question:  What OS is the RT-EVP compatible with?

Answer:     Windows 2000, XP, Vista and Windows 7

Connection is made using mini USB, transfer interface 2.0

 

Question:  What is PCM?

Answer:     PCM stands for Pulse Code Modulation.  Despite the large file sizes associated with PCM sampling, (The RT-EVP can sample up to 96K) we decided to use PCM because it is by far the best method when the highest quality audio is required. PCM strives to emulate the original analog sine wave as closely as possible. The end result is CD quality sound.

 

Question:  What are the bit rates?

Answer:     The user can select the Bit rate depending on length of investigation. But 96K is recommended.

 

A)   PCM   at 96K  =   2    hours and 45 minutes recording time

B)    PCM  at 48K  =   5    hours and 30 minutes recording time

C)    PCM  at 44K  = 6    hours and 10 minutes recording time

D)    PCM  at   8K  = 33 hours recording time

Note: Files are saved in WAV format

 

Question: What is the overall Frequency response of the RT-EVP

Answer:    15Hz to 20KHz, The device has been tested by an independent lab. 

 Question: What is the 711 that is listed under the RT-EVP recording options?

Answer:    It's actually called G.711 which is an International standard for audio (speech) compression and decompression that is used in telephone digital transmission systems. It is a pulse code modulation (PCM) scheme operating at a 8 kHz sample rate, with 8 bits per sample.  G.711 can encode frequencies between 0 and 4 kHz

Question:  Is this a Stereo Digital Recorder and FM Sweep Device?

Answer:    Yes

 

Question: What is the Intelli-Q function?

Answer:    When you are in the Record mode for EVP or Frequency Sweep and listening for an EVP, the Intelli-Q feature allows you to playback / repeat and alalyze any suspect captured evidence without interrupting your Recording session. Each time you press the Intelli-Q reverse button, you can backup in 5-second increments. Similarly, if you press the forward button you can move ahead in 5-second increments.

 

 

 

^{DAS Model RT-EVP}

General  Operating Instructions

 

RT-EVP / Record Mode

1.     Insert Earphone 3.5mm plug into the headset port on the left side of the RT-EVP

2.     Press ENTER for 3 seconds to TURN ON Unit. It will show DAS-RT-EVP on the display and then go to the last file recorded.

3.     Press REC for 1 sec. to Start Recording. RED Light will blink. The RT-EVP will default to a specific Ambient Noise (dB) level. Press the +to increase the Ambient Sound Sensitivity to the 63.5dB level.

4.     Press the REC button for 1 sec. to PAUSE the recording session.

5.     Press the REC button for 1 sec. to Resume the recording session.

6.     To Save the Recording while in the PAUSE mode, hold the REC button for 3 seconds.

7.     To Play what you have just Recorded Press the ENTER button for 1 sec.

8.     To Pause the Playback, Press the ENTER button for 1 sec.

9.     To escape from the Playback and go back to Recording, Press ENTER for 3 sec.

10.  To start a new Recording, repeat step 3.

Note: A special function (Intelli-Q) has been added to allow EVP review and analysis without interrupting your recording session. Each time you press the DOWN ARROW located on the right side of the RT-EVP, you will backup in a 5 second increment. When you press UP ARROW, you move forward by 5 seconds. This tool is only active when you are Recording.

 RT-EVP / EVP & Frequency Sweep Mode

1.     Insert Earphone 3.5mm plug into the headset port on the left side of the RT-EVP

2.     Press ENTER for 3 seconds to TURN ON Unit. It will show DAS-RT-EVP  and then go to the last file recorded.

3.     Press MENU button for 3 seconds.

4.     Use the UP ARROW  to scroll to the Radio Icon, and press ENTER. The frequency Sweep function will activate. Use the + or - to adjust the volume.

5.     Press REC for 1 sec. to Start Recording. RED Light will blink. The RT-EVP will default to a specific Ambient Noise (dB) level. Press the +   to increase the Ambient Sound Sensitivity to 63.5dB.

6.     Press REC for 1 sec. to PAUSE the Frequency Sweep recording session.

7.     Press REC for 1 sec. to Resume the recording session.

8.     To Save the Recording while in the PAUSE mode, hold the REC  button for 3 seconds.

9.     To Play what you have just Recorded Press the ENTER button for 1 sec. be careful that the volume is not too high. Adjust  as necessary.

10.  To Pause the Playback, Press the ENTER button for 1 sec.

11.  To escape from the Playback and go back to Recording, Press ENTER for 3 sec.

12.  To start a new EVP / Frequency Sweep Recording session, repeat starting at step 3.

RT-EVP / Deleting a File

1.     Press ENTER for 3 seconds to TURN ON Unit. It will show DAS-RT-EVP and then go to the last file recorded.

2.     Press MENU button for 1 second to enter the Main Menu section.

3.     Press the DOWN ARROW to get to Index, then press ENTER. All stored / recorded files will be listed.

4.     Use the UP and DOWN Arrow to select the file or files you would like to delete. Then press the DELETE button.

5.     Use the UP and DOWN to select NO or YES then press ENTER to confirm action.

6.     Once you deleted the selected files, press the Escape button two times to return to the Record screen. Note: the ESC button is the round button located at the top right side of RT-EVP just under the right microphone.

RT-EVP / Changing the Playback Time (1-60 seconds)

1.     Press MENU button for 1 second to enter the Main Menu section.

2.     Use the UP and DOWN Arrow to select Record/Playback Time then press ENTER

3.     Use the Up and Down Arrow to select the desired time from 1 to 60 seconds. Then press ENTER. This is the time from the moment you speak, to the time that it is played back through your headset or speaker.

4.     Press the Escape button to return to the Record screen. Note: the ESC button is the round button located at the top right side of RT-EVP just under the right microphone.

RT-EVP. / Using the Intelli-Que Real Time Audio Repeat Feature

1.     This feature only works while in the EVP or Frequency Sweep Record Mode. It is designed to allow the user to analyze EVP data without interrupting the recording session. Each time the Down Arrow  is pressed, you will backup your audio file by 5 seconds.

Each time the Up Arrow  is pressed, you will advance your audio file by 5 seconds.

 

RT-EVP / Adjusting the Time, Backlight, Auto Power

 

1.     Press MENU button for 3 seconds to enter the Main Menu section.

2.     Use the Up Arrow to select the Tool icon, then press ENTER

3.     Adjust as desired then press MENU for 3 seconds to escape out

4.     Select the Microphone or Radio depending on the mode preferred then press

ENTER

 

RT-EVP / Turning the Microphone ON/OFF & Adjusting the Frequency Sweep Speed while in the Hybrid Mode

 

1.     While in the FM Frequency Sweep Mode (Not Recording), press the MENU button for 1 second to enter the FM Set screen.

2.     Use the Up Arrow and Down Arrow to scroll to the Select Sweep or Open MIC, and press ENTER.

3.     Adjust the Microphone ON/OFF and the frequency Sweep speed from 12 to 18 seconds as desired using the UP and   Down Arrow

4.     Press the round Escape button once or twice to return to the Frequency Sweep screen.

 

Note: When the Microphone is ON, it allows EVP's to be combined with the FM Frequency Steps.

RT-EVP / Power Off

 

1.     Press ENTER button for 3 seconds to turn the device OFF

RT-EVP / Connecting to your PC

 

1.     Attach the RT-EVP to your PC using the USB running Windows XP, Vista, or Windows 7

2.     The PC will recognize the RT-EVP as a removable Disk.

3.     Go to My Computer from the Start menu

4.     Double click Removable Disk

5.     Double click Record to open all saved files

6.     Left click & drag file to desktop or folder

 

Note: Be sure to unplug the RT-EVP storage device properly. Stop it correctly then unplug it.

---

DAS Distribution Inc. Prepares to unveil their Model RT-EVP. The Worlds First Real Time Interactive Digital Voice Recorder and Integrated Spirit Box Combination Device for the Paranormal market.

• Operates as a Standard EVP Voice Recorder  ( Real Time OFF )
• Operates as a Standard EVP Voice Recorder with Simultaneous Real Time Audio File Extraction  (Playback is 1sec to 60sec)
• Operates in FM Frequency Sweep Mode with Multi Step Speed Adjustment
• Operates in FM Frequency Sweep & EVP Combination (Hybrid Mode) with Simultaneous Playback
• Inteli-queue Real Time Data Analysis, permits Audio and Sweep Frequency Historical Data review without stopping or Interfering with your recording session.

                                                                                                  

EAST GRANBY, CT., January 30, 2010  Today DAS Distribution Inc. announced plans to release their new RT-EVP Interactive digital voice recorder designed exclusively for the paranormal market. Designed with the paranormal enthusiast in mind, this sleek new recorder boosts many of the key, essential features that paranormal enthusiasts require, which are unobtainable with the conventional off the shelf products currently available.

This new device is sure to catch the attention of the amateur and professional alike who are seeking new and more efficient ways to enhance their investigative skills said Gary Galka, the designer and President of DAS. It is my aspiration that the features and functionality of this new Instrumental Transcommunication (ITC) device, help bring us all one step closer to better understanding not only the world we live in now, but to also help us to appreciate and prepare for the world that awaits us all in the hereafter.

For the first time, The unexplained phenomenon of the Paranormal, Technology and Innovation, Merge together to create the DAS-RT-EVP, The Worlds first and Only REAL TIME Digital EVP Recorder Designed exclusively for the Paranormal Enthusiast. The RT-EVP,  can be configured to operate in four distinct operational modes based on the specific needs and
circumstances encountered in the field. The LCD user interface and operating features are designed for ease of use and simplicity, to address the individual needs of the Amateur and Professional Paranormal Investigator alike. ITC researchers and Investigators of the Paranormal, will be able to Listen to EVP's as they occur LIVE in Real Time, and then interact immediately based on intelligent  data gathered during their Investigations to encourage further Etheral communication. While the RT-EVP can amplify environmental sounds, it is not to be mis-understood as a ambient noise amplifier. The RT-EVP  runs parallel microprocessors to encode, decode and extract data from your SAVED audio file and then PLAY it back to you in a user defined, time selectable window from 1-60 seconds. One of the RT-EVP advanced features can Combine EVP's together with Frequency Sweep Simultaneously to Create the First "Hybrid" all in one  Investigative Tool. For the first time, Paranormal Investigators can explore Audio down to 15Hz well beyond the normal Human hearing range of 20Hz-20KHz, for voice phenomenon in the hidden Infrasound range. The operational Efficiency of the RT-EVP eliminate countless hours of Audio data analysis after your investigation. You can Listen, Record and even Repeat any suspect evidence Audio sections in Real Time using the built in Inteli-Queue Audio analyzer technique without interrupting your LIVE session.

 

PLAYBACK FEATURES: Intuitive Design Optimized for Simultaneous RECORD / PLAYBACK

Users of the new RT-EVP will quickly appreciate and benefit from the simultaneous Record and Playback feature. During a standard EVP session, a user will typically ask a series of questions over a period of time unaware of any response that may be captured during the session. This data is then later reviewed hours or sometimes even days later, which is very inefficient and time consuming. One of the key features of the RT-EVP allows the user to extract, play and hear the saved voice data file while it is still Recording Live. An adjustable 1-15 second Playback On Delay allows the user to ask questions and hear any response that follows within the 1-60 second user selectable window.

A simple question typically takes about 3 seconds to ask. So, if you have the delay set for 5 seconds, you would hear your question repeated back to you in the 5 seconds followed by any ethereal response recorded. If you think you hear something but you are not sure during the Real Time operation, there is a quick review button that allows you to back up in 5 second increments each time it is pressed without disturbing or interrupting your session.

 

FREQUENCY SWEEP FEATURES: Additional Functions added for user Convenience

If the Simultaneous Record and Playback feature is not enough to catch your attention, perhaps the Frequency Sweep interface will. This fascinating technology is believed to permit real time

Communication using AM or FM frequency sound bites coupled with white noise

The RT-EVP can scan the entire FM range of 88.0MHz to 108.0 MHz quickly in about 12 seconds, or 60msec/step. If you would like to fine tune the Sweep Rate to suit your own personal preference, you can adjust it in steps from 60msec, 65msec, 70msec, 75msec, 80msec, 85msec and 90msec. At 90msec, the device will take 18sec. to make a complete 88.0MHz to 108MHz Sweep. The device can RECORD while Sweeping the FM band, which eliminates the need for a separate recorder. In addition, the RT-EVP will capture all of your questions and any local EVP with its internal microphone. The ability to Record Live and hear your voice or EVP superimposed over the FM audio at the same time, opens the door to new types of testing that have yet to be performed, with results yet to be discovered. This Sweep feature is further enhanced through the use of the quick review button. Again, this feature provides an invaluable purpose that allows any suspect historical data to be analyzed in real time without interrupting the recording session.

 

FREQUENCY SWEEP & EVP COMBINED:

New Combined mode of operation allows the Frequency Sweep and Microphone EVP's to be combined into one easy to analyze data file. This provides a new way for Spirit to utilize the technology to better communicate during a session.

FREQUENCY RANGE: Most young Healthy Adults can hear Frequencies between 20Hz to 14KHz (14,000) Hz

The NEW RT-EVP has been designed to detect frequencies from 15Hz, which is considered to be in the Infra-sound range, up to 20KHz. The lower frequency range has yet to be explored by Paranormal enthusiasts due to the inherent limitations with standard digital recorders.

Intuitive Design with Large Backlit Display:

The RT-EVP button interface is positioned for ease of use. Record, Play, Menu and Volume controls are easy to navigate and use. The Large LCD display has a backlight that can be turned On/Off manually. Or, you can apply a timer with pre-defined Off Delays from the Index Menu. A 360-degree Omni-directional stereo microphone is located at the top of the device, and a small

20mm speaker is located at the rear.

 

Price: $289

Anyone interested in receiving additional information, including  some EVP audio files captured while using the EVP / Frequency Sweep combination feature., Contact  Gary Galka, at 1-888-344-0111 or sales@Pro-measure.com