Look for the Mel Meter in the TAPS Magazine

Spirit communication- Validating on a whole new level

The Mel Meter is a high quality instrument that would normally sell to the industrial or commercial sector for well over $250. Two years of manufacturing research and design went into this device to ensure that it was designed to be affordable, specifically for paranormal enthusiasts. Many of you seeking answers, just like me. The functionality of the meter provides the tools necessary to assist the user in making informed decisions based on measurement results related to Electromagnetic Field (EMF) radiation energy and correlating temperature change in the immediate area surrounding the EMF measured value. Professional Paranormal Investigators will quickly recognize the true benefits, and importance of utilizing this information to qualify and validate communication with spirit.

This is a hand held Instrument, but you can also place the instrument on a table top in plain view of the user. A quick press of the “Record” button will enable the Mel Meter’s Minimum and Maximum Peak capture feature. In this mode, even if you should take your eyes off of the Meter, any Min / Max change in EMF or Temperature that occurs will be captured for later review. A video camera aimed at the display can be added to enhance your experience for reviewing at a later time. The exclusive “Night View” display was designed to permit clear and easy display viewing of the EMF and Temperature values in total darkness up to 15 feet away. Try to find a “clean” area free of any potential interference from extraneous EMF sources. This Instrument is not affected by Cell Phones, Text Messages and RF transmitting devices like the KII and Gauss Master.

It is important to understand that EMF and Temperature go hand in hand during a Paranormal investigation. Many times an Investigator will detect an EMF source which is followed by a “Cold Spot” or drop in temperature. The Mel Meter was designed to detect both instantly and simultaneously for this very reason. I find it hard to accept someone's opinion when they say that they "feel" a cold spot. The Mel Meter will react instantly to any temperature change around your body, so if you feel that cold spot the Mel Meter will detect and validate it to you and any others Investigators within your proximity.

During your session, to validate the presence of Spirit, use the EMF and Temperature variables to create a simple sequence of tests. This is the only way an Investigator can rule out possible extraneous interferences as a likely cause for a response. No other meter does this.

1. The first thing to do is request that spirit make its presence known by changing the EMF display on the Mel meter. If there is a direct response to this request, try the next step.
2. Ask spirit to increase the value of the EMF to a specific number and then return to zero. If this happens, things are starting to fall in place. I always thank spirit for cooperating. Try the test again, and select another number. Once you are convinced that things are more than just coincidence. Move to the next step.
3. Pay close attention to the Temperature reading on the Mel meter, it will be measuring the ambient air temperature right in the middle of the EMF sensing area. Ask spirit to lower the Temperature in and around the Mel Meter, and wait for a response. The Mel meter utilizes a high precision fast response Thermocouple sensor that has a resolution of 0.1 degree. Very small changes in temperature can be distinguished with this instrument. The intent is to detect a noticeable “cold spot” in and around the temperature sensor area. If a change occurs, even just a slight change…keep going.
4. Ask spirit to lower the Temperature by 5 degrees F as quickly as possible. This would represent a significant temperature drop. It helps again to have the Max & Min enabled so that you can review the data later. If this occurs, move on to a more complex sequence.
5. Ask spirit if they can change the EMF to 5.0 mGauss and also drop the temperature by 10 degrees F. Any effort by spirit to comply with your request should be acknowledged and praised. This is a major achievement in Paranormal research.

Asking Questions during a session

The Mel Meter utilizes a proprietary micro-processor to quickly scan the EMF and Temperature variable changes in and around the environment. One of the features that has been incorporated into the instrument is what we call the EMF “burst” mode. In this configuration, we allocate 100% of the micro-processors scan speed to be dedicated to the EMF display. By doing this, the EMF frequency response update speed is similar to that of a KII blinking light, or about 5 times faster than a conventional LCD EMF Meter like the EMF-822A you see used by so many investigators.

This feature allows the meter to detect transient EMF spikes, and is good for isolating and locating a dynamic EMF source. The “burst” mode is also ideal for a “question and answer” session with spirit.

In this mode the Mel meter is placed on a table top and you simply ask a question. I typically ask for a response only for a “yes” to my question. A lack of response would be “No”