Look for the Mel Meter in the TAPS Magazine
Spirit communication- Validating on a whole new level
The Mel Meter is a high quality instrument that would normally sell to the industrial or commercial sector for well over $250. Two years of manufacturing research and design went into this device to ensure that it was designed to be affordable, specifically for paranormal
enthusiasts. Many of you seeking answers, just like me. The functionality of the
meter provides the tools necessary to assist the user in making informed decisions
based on measurement results related to Electromagnetic Field (EMF) radiation
energy and correlating temperature
change in the immediate area surrounding the EMF measured value. Professional Paranormal Investigators will
quickly recognize the true benefits, and importance of utilizing this
information to qualify and validate communication with spirit.
This is a hand held Instrument, but you can also place the
instrument on a table top in plain view of the user. A quick press of the
�Record� button will enable the Mel Meter�s Minimum and Maximum Peak
capture feature. In this mode, even if you should take your eyes off of the
Meter, any Min / Max change in EMF or Temperature that occurs will be captured
for later review. A video camera aimed at the display can be added to enhance
your experience for reviewing at a later time. The exclusive �Night View�
display was designed to permit clear and easy display viewing of the EMF and
Temperature values in total darkness up to 15 feet away. Try to find a �clean�
area free of any potential interference from extraneous EMF sources. This Instrument is not affected by Cell Phones, Text Messages and RF transmitting devices like the KII and Gauss Master.
It is important to understand that EMF and Temperature go
hand in hand during a Paranormal investigation. Many times an Investigator will detect an
EMF source which is followed by a �Cold Spot� or drop in temperature. The Mel
Meter was designed to detect both instantly and simultaneously for this very reason. I find it hard to accept someone's opinion when they say that they "feel" a cold spot. The Mel Meter will react instantly to any temperature change around your body, so if you feel that cold spot the Mel Meter will detect and validate it to you and any others Investigators within your proximity.
During your session, to validate the presence of Spirit, use
the EMF and Temperature variables to create a simple sequence of tests. This is the only way
an Investigator can rule out possible extraneous interferences as a likely cause for a
response. No other meter does this.
The Mel Meter utilizes a
proprietary micro-processor to quickly scan the EMF and Temperature variable changes
in and around the environment. One of the features that has been incorporated
into the instrument is what we call the EMF �burst� mode. In this
configuration, we allocate 100% of the micro-processors scan speed to be
dedicated to the EMF display. By doing this, the EMF frequency response update
speed is similar to that of a KII blinking light, or about 5 times faster than
a conventional LCD EMF Meter like the EMF-822A you see used by so many investigators.
This feature allows the meter to
detect transient EMF spikes, and is good for isolating and locating a dynamic EMF
source. The �burst� mode is also ideal for a �question and answer� session
with spirit.
